John Loper II
1.1 KiB
1.1 KiB
Current Carburetor Settings - Husqvarna 450 Rancher
See main issue: OverheatStalling README
📏 Current Carburetor Settings
All measurements from fully seated (lightly tightened, not forced)
| Screw | Position | Direction |
|---|---|---|
| T (Throttle) | TBD | Waiting for measurement |
| L (Low Speed) | TBD | Waiting for measurement |
| H (High Speed) | TBD | Waiting for measurement |
📊 Factory Default Settings (For Reference)
| Screw | Factory Default |
|---|---|
| L | 1½ turns out |
| H | 1½ turns out |
| T | Adjust for smooth idle, chain should NOT rotate |
📝 Notes
- Settings to be documented by John
- Compare to factory defaults once measurements complete
- Likely similar rich-when-hot issue as 440 based on symptoms
📅 Revision History
| Date | Change |
|---|---|
| 2026-03-23 12:59 PM | Progress file created - awaiting measurements |
🔗 Related
- OverheatStalling README - Issue documentation
- Main Project README - Overall chainsaw info