Document adjustment procedure: H to 1½ turns, T to 2-3 turns, test run 10+ min

2026-03-23 13:30:04 -04:00
parent b50ced0a83
commit e9101dad2c
1 changed files with 19 additions and 1 deletions
@@ -55,11 +55,29 @@
 ---
 ## 🔧 Adjustment Procedure (2026-03-23)
 **Recommended Steps:**
 1. **Let saw cool completely** (1+ hour cooling period from previous stall)
 2. **Turn H screw clockwise from 1¾ to 1½ turns** (leaner mixture)
 3. **Start the saw** and let it warm up
 4. **Adjust T screw counter-clockwise** until chain doesn't rotate at idle (likely 2-3 turns)
 5. **Test run for 10+ minutes** to see if stalling is fixed
 6. **If still stalls:**
   - Fine-tune H in 1/8 turn increments (clockwise = leaner)
   - Fine-tune L clockwise to 2 turns if needed
 7. **Document final working settings**
 **Important:** Make small adjustments (1/8 turn) and let saw stabilize 30 seconds between turns. H screw affects high-speed mixture - give it throttle to feel the difference.
 ---
 ## 📅 Revision History
 | Date | Change |
 |------|--------|
-| 2026-03-23 12:59 | Current settings documented - H screw too rich |
+| 2026-03-23 13:29 | Adjustment procedure documented - H to 1½ turns, T to 2-3 turns for test |
 ---