Sage_Software/Husqvarna-440
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Document adjustment procedure: H to 1½ turns, T to 2-3 turns, test run 10+ min

Browse Source
This commit is contained in:
John Loper II
2026-03-23 13:30:04 -04:00
parent b50ced0a83
commit e9101dad2c
1 changed files with 19 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
OverheatStalling/progress.md
+19 -1
View File
@@ -55,11 +55,29 @@
---
## 🔧 Adjustment Procedure (2026-03-23)
**Recommended Steps:**
1. **Let saw cool completely** (1+ hour cooling period from previous stall)
2. **Turn H screw clockwise from 1¾ to 1½ turns** (leaner mixture)
3. **Start the saw** and let it warm up
4. **Adjust T screw counter-clockwise** until chain doesn't rotate at idle (likely 2-3 turns)
5. **Test run for 10+ minutes** to see if stalling is fixed
6. **If still stalls:**
- Fine-tune H in 1/8 turn increments (clockwise = leaner)
- Fine-tune L clockwise to 2 turns if needed
7. **Document final working settings**
**Important:** Make small adjustments (1/8 turn) and let saw stabilize 30 seconds between turns. H screw affects high-speed mixture - give it throttle to feel the difference.
---
## 📅 Revision History
| Date | Change |
|------|--------|
| 2026-03-23 12:59 | Current settings documented - H screw too rich |
| 2026-03-23 13:29 | Adjustment procedure documented - H to 1½ turns, T to 2-3 turns for test |
---