From f7a5033c8ae28623b32736761520425bc13b2689 Mon Sep 17 00:00:00 2001 From: John Loper II Date: Mon, 23 Mar 2026 13:00:33 -0400 Subject: [PATCH] Create progress file for current carb settings documentation --- OverheatStalling/progress.md | 48 ++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 OverheatStalling/progress.md diff --git a/OverheatStalling/progress.md b/OverheatStalling/progress.md new file mode 100644 index 0000000..e5a9ff8 --- /dev/null +++ b/OverheatStalling/progress.md @@ -0,0 +1,48 @@ +# Current Carburetor Settings - Husqvarna 450 Rancher + +> **See main issue:** [OverheatStalling README](./README.md) + +--- + +## 📏 Current Carburetor Settings + +**All measurements from fully seated (lightly tightened, not forced)** + +| Screw | Position | Direction | +|-------|----------|-----------| +| **T (Throttle)** | TBD | Waiting for measurement | +| **L (Low Speed)** | TBD | Waiting for measurement | +| **H (High Speed)** | TBD | Waiting for measurement | + +--- + +## 📊 Factory Default Settings (For Reference) + +| Screw | Factory Default | +|-------|-----------------| +| **L** | 1½ turns out | +| **H** | 1½ turns out | +| **T** | Adjust for smooth idle, chain should NOT rotate | + +--- + +## 📝 Notes + +- Settings to be documented by John +- Compare to factory defaults once measurements complete +- Likely similar rich-when-hot issue as 440 based on symptoms + +--- + +## 📅 Revision History + +| Date | Change | +|------|--------| +| 2026-03-23 12:59 PM | Progress file created - awaiting measurements | + +--- + +## 🔗 Related + +- [OverheatStalling README](./README.md) - Issue documentation +- [Main Project README](../README.md) - Overall chainsaw info