The new "Prime-tower visits..." test from #14685 (H2C/A2L support) throws
"Coordinate outside allowed range" at random on CI, on both Windows arm64 and
Linux x86_64. It's an uninitialized read of WipeTowerData::height.
#10780 (H2D/H2S) added a second wipe tower path, generate_new(), that fills in
depth, bbx, brim_width and rib_offset but not height. The older generate() sets
height, and clear() never did, so on the generate_new path it stays garbage.
first_layer_wipe_tower_corners() passes height to get_wipe_tower_cone_base() as
R = tan(cone_angle/2) * height. The stray bytes are usually zero, so R is zero
and the slice is fine, which is why it passes most runs on every platform. When
they aren't zero the cone radius runs past ClipperLib's limit and the slice
throws. Nothing selects for it, so it just flakes around.
#14685's test is the first to exercise this path, so that's when it started
showing up.
Initializing height in clear() fixes it, same as the m_origin fix in #13712. The
BBL generate_new path has no stabilization cone, so height = 0 is right.
Keep action identity and display metadata
constructor-set so registry keys cannot drift
from the objects they index.
Require sources to publish unique ownership while
the registry retains shared keepalive for runs.
Preserve opaque IDs and persisted state keys.
Lifecycle callbacks can be registered while
another thread dispatches them, risking races
and iterator invalidation.
Snapshot shared callback objects under a mutex,
then invoke them unlocked to preserve reentrancy
and mutable callback state.
CLI: guard 4 null derefs when loading a 3mf with no preset ids
At OrcaSlicer.cpp:1700-1704 the post-load block reads printer_settings_id,
print_settings_id, filament_settings_id, and nozzle_diameter from the
config that the 3mf carries. If the 3mf is a BBL/BBS-flavored 3mf but
was produced by a non-GUI writer (e.g. CLI --export-3mf without a
loaded preset) any of those keys can be absent, and config.option<T>(...)
returns nullptr — the ->value / ->values deref then SIGSEGVs.
Wrap each optional lookup in an if-let. printer_model, printer_extruder_variant,
and print_extruder_variant already pass create_if_missing=true and are safe.
Repro (BEFORE this patch):
orca-slicer --export-3mf out.3mf in.stl # produces preset-less 3mf
orca-slicer --info out.3mf # SIGSEGV at :1700
bt: __cxx11::basic_string::_M_assign
-> Slic3r::CLI::run @ OrcaSlicer.cpp:1700
AFTER: --info out.3mf returns exit 0 with the mesh summary.
The same failure mode affected --inspect-mesh, --inspect-paint, and
every other action that has to walk the loaded model's config; --slice
would only survive because it always injects a printer via
--load-settings.
For non-BBL host printers (Moonraker/Klipper, Qidi, Snapmaker, Creality), switch_printer_agent() only re-selected the machine when the agent type changed. Switching between two printer presets that use the same agent left the selected machine and the agent's cached device_info pointing at the previously active preset's host, so filament sync kept hitting the old printer.
Re-select the machine when the agent type is unchanged but the target host differs, so the selected machine and device_info always follow the active printer preset.
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Plater's pImpl (unique_ptr<priv> p) is destroyed before the wxWindow base
destructor runs DestroyChildren(), so child GLCanvas3D windows are torn down
after p is gone. GLCanvas3D::~GLCanvas3D() -> reset_volumes() then dereferences
the freed p through two paths:
- Selection::clear() -> plater()->canvas3D() -> p->get_current_canvas3D()
- _set_warning_notification() -> plater()->get_notification_manager()
Guard both with the existing wxGetApp().is_closing() flag; both are UI-only
side effects that are no-ops during shutdown, so normal-use behavior is
unchanged.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fix text rendering issue when using MacType, with the original harmony os sans installed globally (OrcaSlicer/OrcaSlicer#14566)
The new fonts are generated using fonttools that only add gasp table to the original font without touching other parts
Move plugin capability enumeration, loader
subscriptions, and action construction into
ScriptActionSource. Keep ActionRegistry focused
on generic action state, dispatch, and snapshots.
Use source rather than package for generic origin
metadata so future non-plugin providers share the
same interface. Action IDs and persisted
configuration remain unchanged.
Subscribe before initial enumeration so plugin
events cannot be missed between the snapshot and
callback registration. Add a focused test for
source startup.
Decouple registry dispatch from plugin-specific
result types so future action types can provide
their own run implementations.
Store actions behind shared pointers to keep them
alive while plugin UI pumps a nested event loop
and queued refreshes mutate the registry. Scope
"don't ask again" to an individual action instead
of its whole plugin.
Mqrius